Do I need a flipper panel?
We try as much as possible to fit a single piece of glass, this works in many situations. Where we can’t fit a glass long enough (due to a variety of reasons), then you might need a flipper panel to help keep the splashes inside.
As a simple rule of thumb, if we can fit at least an 1000mm long glass, then you won’t need a flipper panel.
For very large bathrooms, we might fit a long glass (1000mm+) with a flipper panel, but not use any end glass (for those situations where the tray is shorter than the length of the room)
Can I have a shower seat inside the walk in shower?
Yes, we can fit a shower seat inside the walk in shower. The most common type is the folding one on the wall. Please let us know if you want this before the projects starts, since the area behind the walk in shower must be strengthened to support the seat on the wall.
Can I have the shower controls outside the spraying area?
This is a common design for our bathrooms. The short answer is that yes, for a concealed thermostatic shower you can have the controls outside the spray area. The concealed shower valve is quite thick, so we would need enough space in the wall for this (and it can’t work with brick/granite walls, only with stud walls).
Are tiles or panels better for a walk in shower?
Both options have advantages and disadvantages. One thing you should consider when having a walk in shower is the total height to the ceiling. Panels come in 2400mm and sometimes ceiling are higher than this; especially if you had a bathtub previously (where the panel sits on the bathtub), if you have a walk in shower with a tall ceiling you’ll be left with a gap at the top. With tiles you don’t have this issue.
Are there different options for walk in shower?
Yes, you can check the product options for shower and enclosure. You can click here to get there. All options are the same price in this link.
Will the tray be floor level?
We try to lower the shower tray as much as possible, but sometimes the drainage in the house doesn’t allow us to make it floor level. If you look at some of our past walk in shower notice, you’ll notice that some of them have small steps.
Do I need to refurbish the whole bathroom for a walk in shower?
The walk in showers are the only partial projects we accept doing. This is because it’s relatively easy to replace a bathtub with a walk in shower, as long as the tray for the shower enclosure is the same or larger than the footprint of the old bathroom.
You will still have to change the panels or tiles in the shower area (since the tiles or panels on the bathtub don’t go to the floor, but only to the bathtub level).